Door Rigid Profiles: | PVC | Window Profiles: | Colorful |
---|---|---|---|
PVC Extrusion: | Office Partition | Refrigerator Profile: | Rigid PVC |
Office Partition: | FRAME | Super Market Accessories: | Price Label Holder |
PVC Tube: | Soft Or Rigid | Transmission Cables: | Soft Pvc |
PVC Profiles Customized Plastic Profiles Rigid And Soft PVC Window Door Profiles Transmission Cables
PVC profile is an industrial and domestic PVC product formed after high temperature extrusion by PVC resin.
Performance classification
According to the performance can be divided into hard and soft two kinds.Hard PVC profile is mostly used in construction, such as making PVC doors and Windows, PVC floor, PVC pipe, soft PVC profile is used in PVC hose, transmission cables, etc.
Main features
PVC profiles with functional additives have anti-aging, ultraviolet resistance, corrosion resistance, high strength, cheap price, good insulation and heat insulation performance, can partially replace aluminum profiles, steel, etc.The contamination is lower than the aluminum profiles.
Development history
PVC profile products have experienced the introduction period and high-speed development period, from the perspective of time, can be defined as the 1980s-mid-1990s and 1995-2002 respectively.After 2003, the PVC profile industry has entered a transition period.
Since 1995, a number of enterprises with strength, began to digest and absorb the technical essence of foreign European profiles, developed their own doors and Windows series, become the leading of domestic plastic doors and Windows, promote the technical update and development of doors and Windows, but also make the whole industry get unprecedented development and high-speed growth.
As one of the products of scientific and technological development, PVC pipe is within reach in daily life.In Europe, plastic tubes grew by 8% in 1980 to 1990 and produced 3.5 million tons in 2001, with PVC tubes accounting for 60%.The United States produced 1.6 million tons of plastic tubes in 1985, and in 1999 it produced about 3.6 million tons, of which PVC tubes accounted for 78%.China's first UPVV expansion pipe was born in 1983 in Shenyang Plastic Factory (now the predecessor of Shenyang Jiuli), and since then, Chinese mainland has the production capacity of PVC water supply and drainage pipe.
Quick Details
Warranty: | 3 years |
Place of Origin: | Jiangsu China |
Brand Name: | OEM |
Product Name: | Plastic extrusion profile |
Material: | PVC/UPVC/ABS/PP/PE or other plastic extrusion profile |
Length: | Customized Length |
Thickness: | 1.5mm-2.5mm |
Shape: | Customized |
Color: | Customized |
Package: | Carton or pallet |
Port | Shanghai |
Lead time | First batch 35 days |
Application: | Different Fields |
What are the Different Types of Plastic Extrusion?
Depending on the die shape, different products can be formed using various available extrusion processes listed below:
1. Tubing Extrusion
This extrusion type is used for the extrusion of tubes and pipes. In this process, air with positive internal pressure may also be applied. The tubes or pipes after exiting the die are pulled into a cooling tank were they are normally water-cooled.
2. Blow Film Extrusion
This type is used for the production of plastic films tubes through a continuous sheeting. In this process the film tube melt is cooled before leaving the die, producing a semi-solid tube and blown to expand to a desired size and film thickness. This process is used for manufacturing of products such as shopping bags.
3. Sheet Film Extrusion
This type is used for the extrusion of plastic sheets or films that are too thick to be blown. After exiting the die, the sheets are pulled and cooled through a series of cooling rolls, which also regulate the sheet thickness.
4. Over Jacket Extrusion
This extrusion type is used for wire coating. In this process the wire is pulled through the centre of the die. If adhesion is required between the wire and the coating, pressure tooling is used. In this method the wire is covered in molten plastic whilst in the die and is pressurized when exiting the die. If adhesion is not required, jacketing tooling is used. In this method, the wire is covered by the melt as it exits the die.
What is PVC density?
- PVC is chemically stable and does not de-polymerize.
- Density: 1.32-1.42 g/cc
About us
As a professional plastic extrusion profile and injection molding manufacturer, JF is specialized in production of all kinds of plastic extrusion profiles and injection molding products (including PVC, ABS, PS, PP, PE, PA, POM, PC, PMMA, EPS, PBT, PETG, TPX, etc.) that is applicable for refrigerator, freezer, cold chain and kitchen cabinet, vending machine, air conditioner and ventilating system, building and decoration industry, etc.. Integrating development, design, production and sales, we have28 plastic extrusion lines and 6 injection molding equipments, outputing 60000 tons of plastic profiles and injection parts annually.